Monitoring for plant & machinery
Whether or not it has a power source on board, we can find a solution: tractors, generators, pumps, diggers, irrigators, and anything else that sits on a site or yard unattended. Location is only part of it: monitor run hours, fuel level, pressure, temperature or any sensor you fit, and trigger outputs remotely. Turn any machine, old or new, into a smart, connected asset.
Live location & geofenced sites
See every machine on one map. Draw a zone around a job site or yard and get an alert the moment something crosses it, in or out of hours.
Run hours
Wire into ignition or power state to track run hours per machine, useful for servicing schedules and for hire equipment billed by usage.
Fuel level monitoring
Read fuel level via OBD2 on vehicles that support it, or wire a tank float sender straight into a configurable input, works on virtually any machine with a fuel tank, OBD2 port or not.
Configurable sensor inputs
Oil pressure, coolant temperature, hydraulics, engine load, door or lid switches, or any custom sensor, wire in whatever the machine needs monitored, limited only by the sensor you fit, and read it in the app alongside location.
Remote outputs
Trigger a relay from your phone: remote-start a generator or pump, immobilise a vehicle, or fire a siren, no need to be on site.
Theft & power-disconnect alerts
Equipment left on a site overnight is a common target. Get an alert the instant it moves, or the instant power is cut.
Hardwired, IP67 option
No batteries to charge or swap. Fitted out of easy reach, with an IP67-rated option for anything exposed to weather or wash-down.
Built for what you actually run
Not on the list? If it has a 12V/24V supply we can hardwire into it, and for battery-only or non-standard setups we can spec a solar or self-powered option, get in touch and we'll help.
Which tracker fits
Most plant and machinery installs want multiple inputs and outputs, so run-hour sensing and a remote-start or immobiliser relay share one unit. Simpler setups, with one sensor or just location and an immobiliser, can step down. Every tracker here is the sealed (IP67 or IP69K) version.
Running more than one machine?
For fleets and multi-site operations we can talk through the right setup and volume options directly, no need to work it out from a product page.